Descrizione del prodotto
*Jenoptik German Laser chip*
The main principle of 808nm diode laser hair removal system is selective photothermolysis (SPTL). 808nm laser emits the gold wavelength of light, 808nm to penetrate into hair follicle. Using the theory of selective optical absorption, laser can be preferentially absorbed by the melanin of the hair. And then the hair shaft and hair follicle are heated rapidly in order to destroy the oxygen-supply organization and around the hair follicle. So that the hair follicles is to stop growing, damage hair follicle degeneration and atrophy to achieve permanent hair removal.
Working Method:808nm diode laser system features with SHR In-motion and stamping method for hair removal. SHR works by gradually heating the dermis to a temperature that effectively damages the hair follicles and prevents re-growth, while avoiding injury to the surrounding tissue. The sweeping In-Motion technique of moving the applicator repeatedly over the treatment area ensures full coverage while sapphire cools the skin surface - preventing superficial burns and allowing for virtually painless, yet highly effective hair removal. no side effects in dark skinned patients.s.
Non-channel chips handle :
1.Lasted technology--Non channel chips handle
2.Let alone life span of the laser handle is upgraded to 20,000,000.00 shots
3.4 size spot for your reference, 15*15mm/15*20mm/20*25mm/25*31mm
Our device utilizes upgraded technology Non-Channel instead of micro-channel or macro-channel handle .Because of special chips arrangement non-channel handle can take up the water temperature 55ºC, while both micro and macro channels can only take maximum 35ºC.What's more, Non-channel handle support the maximum current 130 A. Micro-channel and macro-channel can only take 60Aand 40Arespectively.For that reason the upgraded diode laser ensures longer working hours than other technologies on the market., and you never will have to suffer from the handle-burning problems again and again.
10.4 Inch Color Touch Screen , German imported Laser emitter
1.Comfortable laser hair removal treatment, completely safe and painless & permanent .
2.Up to 10Hz repetition rate with a big spot size ,which provides you with a fast and efficient treatment by saving time and cost.
3.With outstanding TEC cooling system,which can keep the machine working 12 hours continuously as well as a good painless feeling during the treatment.
when the water temperature exceed 50 centigrade, the machine will automatically shut down.
4.DC diaphragm pump : 5L/min, pressure 60psi, Suction head lift 5 meter , high lift 50 meter, ensure good water circulation.
5.Filters used can keep all the impurities and ion out of water to avoid the damage possibility of the laser bar .
6.Copper radiator : with SUS316 stainless steel water pipes in side, offer better anti-rust resistance, to ensure the purity of the water, besides, the copper is better in heat dissipation .
7.The optical lense never gets foggy
8.Up to 20,000,000 laser shots
Operation screen 1
Operation screen 2
Two different operation screen can be customized
Hair removal process?
1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to 'standby' .
4. Put cooling gel on treatment area about 2mm.
5. Wear protect glasses for patient and operator.
6. Shot the treatment area, let the crystal tip closely touch cooling gel, permitted to have 1/3 overlapping on treatment area.
7. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients feel warm or hot, you may put ice bag on treatment area until heat disappear.
|Display Screen||10.4 inch color touch screen |
|Pulse Width||5 - 400 ms |
|Fluence /Energy||5-120J /cm2 |
|Output Energy||4-118J/cm2 |
|Skin Cooling Temperature|| -5 ~ 5 ºC |
|Spot Size ||10*12mm2 |
|Diode power || 300W/450W/600W for options|
|Power Consumption|| 1200W |
|Cooling System|| Water+air+semiconductor |
|Voltage|| AC220V/110V,50/60Hz |
|Packing way||Aluminum case with PE foam protection|
Delivery and Shipping:
Production Lead time :5-7 days after payment received
Payment term: T/T/ Western Union or Paypal ( full payment before shipment)
Shipment way : DHL / FEDEX /TNT / EMS / Customer's nominated shipping forwarder
1.One year warranty, lifetime maintenance as well as 3 months free spare parts replacement.Once you get the
machine,we would provide you with the user manual, maintenance manual, tutorial viode for your easy reference and operation .
2.Training: (Video+Manual+Online Service) Can Make You Operate It Easily.
3.Professional guide: 24 Hours online customer service, Our Professional Engineer teams who can speak Chinese ,English would be of your great help to solve any problems you meets during using .
4.OEM&ODM service for distributor (Logo/Color/System Fuctions can be customized)